User's Manual

• Do not drop the product from a high place.
• Do not repair or disassemble the product.
• Keep the product away from water, alcohol, benzene, etc.
• Avoid contact with flammable materials.
• Do not place or store the product near excessive heat or flammable material.
• Please keep away from damp and dusty places.
• Do not place any heavy objects on the product.
• Warranty is immediately voided if the product or its associated accessories are
serviced or repaired by any entity, including persons, not authorized by
S&O Electronics .
• Do not arbitrarily replace the battery because it may explode.
• If you use an incompatible recharger, the product may be damaged.
• This product is not waterproof. Avoid humidity or water when using the product.
• Make sure that an infant or a child does not swallow a small components of the
product.
• If you have a medical device implanted, contact your doctor before using this device.
This device is not a medical device.
• Disconnect the charger from the wall outlet to prevent unnecessary power
consumption.
Safety Cautions
If the product is exposed to a large amount of sweat, wipe the product clean.
! Reference
Avoiding hearing damage
If volume on the headset is too high, permanent hearing loss may
occur. Please set the volume to a safe level. You can become
habitual to hear at high volume that may sound normal but can
damage your ears. If you experience ringing in your ears or
muffled speech, stop listening and have your ears checked by the
specialist doctor. The louder the volume, the more quickly the
hearing can be damaged.
Hearing experts suggest how to protect your hearing:
· Limit the amount of time you use the headset at high volume.
· Avoid the habit of increasing the volume so that you do not hear the loud
noises around you.
· Turn the volume down if you can not hear people speaking around you.
For setting the maximum volume limit of the connection device, refer to the
instruction manual supplied with the connection device.
Class B equipment (home-use broadcasting communication equipment):
This equipment is intended for home-use (Class B) electromagnetic
compatibility equipment and can be used in all areas.
2. Battery information
- A rechargeable battery has a long service life if treated properly.
- A new battery or one that has not been used for a long period of time could have
reduced capacity the first few times it is used. Do not expose the battery to extreme
temperatures, never above +50°C (+122°F) or below -10°C (+14°F).
- For maximum battery capacity, use the battery at room temperature.
- If is used in low temperatures, the battery capacity will be reduced. The
batterythe battery can only be charged in temperatures between +10°C (+50°F) and
+45°C (+113°F).
- RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF
USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
Important Safety Information
Additional Information
Declaration of Confirmation
FCC NOTICE TO USERS:
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may
cause undesired operation.
DECLARATION OF CONFORMITY :
Hereby, S&O Electronics Sdn. Bhd.. declares that these SP-A7W are in compliance with the
essential requirements and other relevant
provisions of Directive 2014/53/EU .
Bluetooth® is a registered trademark of Bluetooth SIG, Inc. worldwide.
Qualcomm®
aptX™ audio is a product of Qualcomm Technologies International, Ltd.
1. Radio frequency exposure
This Bluetooth® Wireless Stereo Neckband Speaker SP-A7W is a radio transmitter and
receiver. When in operation it communicates with a Bluetooth® equipped mobile device
by receiving and transmitting radio frequency (RF) electromagnetic fields (microwaves) in
the frequency range 2.4 to 2.4835 GHz. Your Bluetooth® Headset is designed to operate
in compliance with the RF exposure guidelines and limits set by national authorities and
international health agencies when used any compatible mobile phone.
Additional Information
Specifications and FeaturesMedia Playback
7 8 9 10
Call Functions
6
! NOTE
Remote control of call functions with the Speaker may not be applicable in some mobile
devices/applications.
Function What to do
Play/Pause Press the Play/Pause button.
Volume Control
Press the Volume Up button or the Volume Down button changes the
volume one level at a time.
Previous Song
Press and hold the Volume Down button for 1 second while
playing the media.
Next Song
Press and hold the Volume Up button for 1 second while playing
the media.
Change Acoustic
Vibe Mode
Press the Volume Up button and the Volume Down button to
turn Acoustic Vibe on and off.
Access voice
control
Press and hold Volume Down button to activate voice control. To cancel
voice control, press and hold Volume Down button again. This function is
not applicable in case your mobile device does not support voice control.
Function What to do
Answer a call
/ End a call
Press the Play/Pause button.
Access voice
control to make
a call
While not on a call, press and hold Volume Down button to activate
voice control. To cancel voice control, press and hold Volume Down button
again. This function is not application in case your mobile device does not
support voice control.
Switching to
Speaker or to
Mobile device
while on a call
Press and hold Volume Up button for 2 seconds to switch the call to the
speaker or to your mobile phone.
Answer a second
incoming call and
put the current
call on hold
While on a call, press and hold the Play/Pause button for 1 second.
Decline an
incoming Call
Press and hold the Play/Pause Button for 2 seconds.
Switch between
two calls
With two active calls, press and hold the Play/Pausebutton for 1 second.
Mute a call
While on a call, press and hold the Play/Pause Button for 1
second.
Unmute a Call
While on a call, press the Jog Button in the middle.
Out of Communication Range
The speaker may lose connection if device is out of range(10m or 33 ft.)
This status of losing connection will be notified of by voice prompt, and the speaker
will automatically try to reconnect for 10 minutes. If automatic reconnection is not made,
you can try to connect it manually. After 10 minutes, the speaker stops to reconnect and
LED indicator will blink 2 times quickly in every 5 seconds in red color.
11
Item Comments
Model SP-A7W
Name
Specific low power wireless device
(Data transmission wireless device)
Bluetooth Specification
V 5.0 (HSP/HFP/A2DP/AVRCP Profile)
Battery DC 3.7 V / 410 mAh , Lithium-ion Polymer
Standby Time Up to 750 hours
Talk Time Up to 17 hours
Music Play Time Up to 14 hours
Charging Time Less than 2.5 hours
Input Voltage DC 5 V, 200 mA (Operating Voltage 4.75 V – 5.3 V)
Operating Temperature
-10 ˚C(+14 °F) ~ +50 ˚C(+122 °F)
Dimension / Weight 181 mm (W) X 181 mm (L) x 16 mm (H) / 88 g
Operating Frequency 2402 MHz - 2480 MHz
Antenna power supply 3 mW
The recipient of the
conformity assessment
EM-Tech
Manufacturer EM-TECH VIETNAM CO., LTD.
Country of Origin Vietnam
Manufacturing year Marked on the box separately (S/N : 1st-3rd number – Yr/Mon)
Certification Number R-R-eMT-SP-A7W