User's Manual

Paring and Connecting
Wearable Wireless Speaker can easily be paired / connected with the help of voice
prompts.
If voice prompt says that the battery is insufficient, then you are advised to recharge
the battery before proceeding to pair and connect.
In case pairing is not completed within three minutes for various reasons, the power
automatically turns off, with power switch still in ON position.
To turn the device on, slide the Power Switch to OFF position and then back to ON
position.
Product Components Product Description
1 2 3 4 5
User Manual
Rev 1.0 ENG
All rights reserved.
Copyright © 2018
S&O Electronics (Malaysia) Sdn. Bhd..
SP- A7W
Automatic Reconnection
Status Description
Turning Power On
LED blinks in blue color for 4 times, LED blinks 3 times in the color
indicating Battery status, and LED blinks indicating Connection Status.
Turning Power Off LED blinks 4 times in blue color.
Search Mode Blue LED is on.
Being connected LED alternately blinks in Red and Blue color.
Connected
LED blinks in blue color once every 5 seconds.
Call / Music play LED blinks in blue color once every 5 seconds.
Please read and keep all safety and use instructions.
Store this User Manual in a place easily accessible to all users.
EM-Tech reserves right to change this User Manual without prior notice.
This device has been tested and found to comply with the limits for a Class B
digital device(Home broadcasting communication equipment). It has class B
electromagnetic compatibility and is primarily designed for but not limited to
home use.
SP-A7W
Micro USB Charging Cable 3.5mm AUX Cable
Bluetooth Dongle
제품 보증서
User ManualWarranty Card
If you have bought SP-A7W, confirm that all above parts are included.
Actual product design may differ from images shown in this manual.
! CAUTION
Make sure that only components specified by the manufacturer are used.
Using non-authentic components may damage the product and thus void the warranty period.
⑧ Speaker L1
① Power / Play / Pause button
④ LED
② Volume Up
⑦ Speaker R1
③ Volume Down
⑤ MIC
⑥ DC IN
Qualcomm® aptX™ audio
Qualcomm® aptX™ audio is a Bluetooth wireless technology that prevents loss of sound and
provides CD-quality audio. You can enjoy clear audio sound when listening to music and
watching movies.
Qualcomm® aptX™ audio works automatically only on the phones or the audio devices that
support Qualcomm® aptX™ audio.
Qualcomm® aptX™ audio is a product of Qualcomm Technologies International, Ltd.
NOTE: For the purpose of preventing hearing damage, we have put warning sound for the upper
6 levels of total 16 volume control.
If you plug in the charger while the power is [ON], it
automatically turns off. The speaker does not operate while
charging.
To turn the power on, slide the power switch toward [OFF] and
then slide it back toward [ON].
To check the battery status, press and hold the Jog Button
toward any of (-) or (+) direction for 2 seconds, and voice
prompts and status LEDs will guide you.
Battery Charging and Alerts
Open the Charging port cover and connect the charging cable.
LED Red Purple Blue
Battery Status Charging 80 % Completed
Battery Status Sufficient Normal Insufficient
LED Blue flashes three times Purple flashes three times Red flashes three times
! CAUTION
● At extremely high or low temperatures, the battery may not be fully charged.
● To maintain functionality, the device needs to be charged at least once in every six months.
● Battery of the device has limited life, as with any other rechargeable batteries.
Capacity may gradually be decreased over time of which extent may vary depending on the
conditions of use and external environment.
● There are multiple factors such as volume level, external environment etc that may affect the
time of device power turning off, other than the percentage of battery left.
● Use this product only with an agency approved power supply which meets local regulatory
requirements (e.g., UL, CSA, VDE, CCC).
● The equipment shall be connected to a power supply with limited power source.
Connect the Micro USB charging
cable to the slot and to AC
adapter of which DC voltage
output ranges 4.75~5.3V(Typical)
Quick Connection
1 Turn Wearable Wireless Speaker on by sliding the power switch toward the ON position.
The device switches to Search Mode and the Blue LED turns on.
2 Select Wearable Wireless Speaker from your device to connect with. When connection is
complete, it is announced by voice prompt.
! Caution
Please be noted that there can be certain devices that may not be paired/connected with
Wearable Wireless Speaker , for various reasons including but not limited to data security
settings.
Manual Connection
1 Turn Wearable Wireless Speaker on by sliding the power switch toward the ON position.
2 Press and hold the Play/Pause button and Call button simultaneously for two seconds.
Wearable Wireless Speaker switches to Search mode.
3 Select Wearable Wireless Speaker from your device to connect with.
Wearable Wireless Speaker automatically reconnects to the Bluetooth enabled device
it was last connected.
If automatic reconnection does not work, manually connect it as explained above.
! Caution
In some cases, any of Automatic Reconnection or Manual Connection may not work. In this case,
delete Wearable Wireless Speaker from the pairing device list, and search and pair Wearable Wireless
Speaker again.
LED Indicator
Wearable Wireless Speaker