Data Sheet

Preliminary
DATASHEET Ɩ EMBP00
Copyright 2019, EM Microelectronic-Marin SA
EMBP00-DS, Version 0.1, 3-Apr-19
6
www.emmicroelectronic.com
GENERAL OPERATING CONDITIONS
The general operating conditions are listed in Table 2.
Table 2: General Operating Conditions
Parameter
Min
Typ
Max
Unit
Supply Voltage (VCC)
2.0
3.0
3.6
V
Temperature Range
-20
25
+60
°C
Humidity Range
0
25
85
RH
ELECTRICAL CHARACTERISTICS
The electrical characteristics are given in Table 3 for a typical use case. A battery lifetime calculator is available to
estimate battery the battery lifetime with alternate configurations.
Unless otherwise specified: VCC=3.0V, T=25°C.
Table 3: Battery Life-Time and Range Use Case Example
Operating Mode
Specification
Typical
Value
Unit
Use Case
Operating
Parameters
Warehouse Mode
Storage Time
1
years
Average Current
3.8
µA
Beaconing Mode
Beacon Interval In Active Mode
1000
msec
Output Power In Active Mode
0
dBm
Average Current In Active Mode
15
µA
Average Current in Inactive Mode
2.5
µA
Line-of-Sight(LOS) Range
30
m
Use Case
Battery Life
Based on
Activity Level
Example 1:
10% Activity
Percentage of Life in Active Mode
10
%
Percentage of Life in Inactive Mode
90
%
Lifetime Average Current
5.0
µA
Battery Lifetime (CR2032)
52
months
Example 2:
50% Activity
Percentage of Life in Active Mode
50
%
Percentage of Life in Inactive Mode
50
%
Lifetime Average Current
10
µA
Battery Lifetime (CR2032)
26
months
Example 3:
90% Activity
Percentage of Life in Active Mode
90
%
Percentage of Life in Inactive Mode
10
%
Lifetime Average Current
15.1
µA
Battery Lifetime (CR2032)
17
months
Note 1: Battery Lifetime is calculated based on the average current using a Renata CR2032 battery with 225mAh of
battery life under typical conditions.
Note 2: Beacon interval is the Bluetooth advertising interval (advInterval) as defined in the Bluetooth Specification
V5.0, Volume 6, Part B, Section 4.4.2.2.
Note 3: Range is measured outdoors, line-of-sight, with an iPhone
TM
. 4S
REGULATORY
EMBP00 is certified and complies with the following regulatory requirements:
6.4.1. Regulatory Information CE
EM Microelectronic, as the responsible party for regulatory compliance, declares under our sole responsibility
that as delivered the described product is in conformity with the RED Radio Equipment Directive 2014/53/EU,
following the provisions of ERP Directive 2009/125/EC, EU RoHS Directive 2011/65/EU, including the
amendment 2015/863/EU on the restriction of the use of certain hazardous substances in electrical and
electronic equipment, and carries the CE-marking. Refer to emmicroelectronic.com for the signed declaration.