Data Sheet

Preliminary
DATASHEET Ɩ EMBP00
Copyright 2019, EM Microelectronic-Marin SA
EMBP00-DS, Version 0.1, 3-Apr-19
5
www.emmicroelectronic.com
LABELS FOR EACH MODEL IN THE FAMILY (EMBP00 , EMBP01 , EMBP02 , EMBP03)
5. MECHANICAL
MATERIALS
PA66 Zytel 101E NC010 Blue casing filled with WEVOPUR 552FL with WEVONAT 300.
ACCELEROMETER
The accelerometer is an LIS2DWL MEMS digital output motion sensor for measuring high-performance ultra-low-
power 3-axis "femto" acceleration. The X-Y-Z orientation of the accelerometer are as shown in Figure 2.
Figure 2: EMBP00 XYZ orientation of the accelerometer in final product
6. ELECTRICAL
Typical values are stated at room temperature (T=25
o
C) with a supply voltage of VCC=3.0V.
HANDLING PROCEDURES AND ABSOLUTE MAXIMUM RATINGS
The finished product is compliant with EN 61000-4-2 (Electrostatic Discharge) level 2: 4kV contact discharge and 8kV
air discharge.
Stresses above these listed maximum ratings may cause permanent damage to the device. Exposure beyond
specified operating conditions may affect device reliability or cause malfunction