Data Sheet

Preliminary
DATASHEET Ɩ EMBP00
Copyright 2019, EM Microelectronic-Marin SA
EMBP00-DS, Version 0.1, 3-Apr-19
15
www.emmicroelectronic.com
2
3
Flip 4D/6D
4D Detection
6D Detection
6D
-
6D Threshold
50
60
70
80
80
Degrees
6D Low Pass Filter
Enable
Disable
Enabled
-
Tap Shock X Threshold
0 to 31
9
LSB
Tap Shock Y Threshold
0 to 31
9
LSB
Tap Shock Z Threshold
0 to 31
9
LSB
Tap Shock Time
4
8
12
16
16
Samples
Tap Quiet Time
2
4
6
8
2
Samples
Double Tap Latency
16
32
48
64
80
96
112
128
144
160
176
192
208
224
240
256
128
Samples
Tap Axii
X Axis
Y Axis
Z Axis
All Enabled
-
Freefall Duration
0-63
3
Samples
Freefall Threshold
5
7
8
10
11
13
15
16
10
LSB
Modifications to the accelerometer settings can have a dramatic impact on battery life. Consult the STM
datasheet to calculate the full impact of changes to the accelerometer settings.
ADVERTISEMENTS
7.2.1. Device Address
Each EMBP00 has a unique factory-assigned address. The first 3 octets of the device address are the EM
Microelectronic OUI assigned address from the IEEE 802 committee and subject to change without notice.
The last 3 octets of the device address are uniquely assigned by EM Microelectronic. All advertisements
enabled in the Beaconing and Configuration Modes share the same Device Address.
The device address to be used may be modified with the SimpleBeacon Configuration Tools. If the address
00:00:00:00:00:00 is entered, then the factory-assigned address will be used.
7.2.2. Advertising Channels
Advertisements are transmitted on channel 37, 38 and 39. Firmware options to disable up to two of the three
advertisement channels for non-connectable advertisements are available. The option to disable the
advertisement channels is unavailable in the standard release of the SimpleBeacon Configuration Tools. The