Data Sheet

Preliminary
DATASHEET Ɩ EMBP00
Copyright 2019, EM Microelectronic-Marin SA
EMBP00-DS, Version 0.1, 3-Apr-19
10
www.emmicroelectronic.com
user. The configuration timer is started on entry into the Configuration Mode. If no connections are made
before the Configuration Timeout occurs, the EMBP00 returns to the Startup State. Exit from
Configuration Mode is initiated by Configuration Timeout. When a connection is made to the EMBP00,
the part will stay in a connected state until the master terminates the connection or is out of range. On
disconnect, the EMBP00 returns to the Startup State unless a reset was initiated during the connection.
The additional options to change the Packet Type is unavailable in the standard release of the
SimpleBeacon Configuration Tools. Options to control these features can be made available on request.
Table 9: Configuration Mode Advertisement Configuration Options
Description
Options
Default
Packet Type
Connectable
Connectable
Advertisement
Interval
30ms - 18hrs
500 ms
Tx Power Level
Settings (dBm)
6.2
4.6
2.5
0.4
-1.4
-2.6
-4
-5.5
-6.9
-8.4
-9.9
-11.4
-13.1
-14.6
-16.4
-17.9
-29
-33.5
0.4 dBm
Beaconing Mode
In Beaconing Mode, the EMBP00 beaconing engine is enabled. The beaconing engine supports up to 10
advertisements running in parallel. Each advertisement may have a unique Packet Type, Advertisement
Interval, and Transmit Power Level. In addition, each advertisement may be gated such that the
advertisement is Always Enabled, Enabled Only When Active or Enabled Only When Inactive from
Beaconing Mode. Table 10 shows the configuration options available for each advertisement.
Description of the transmit power level settings are from the EM9304 datasheet. Additional details
regarding the impact on the operating behavior, consumption and performance of the device can be
found in the datasheet. Modifications to the transmit output power and advertisement interval can have a
dramatic impact on battery life. Consult the EM9304 datasheet and battery lifetime calculator to calculate
the full impact of changes.
Table 10: Beaconing Mode Advertisement Configuration Options
Description
Option
Default
Packet Type
iBeacon™
Eddystone UID™
Eddystone URL™
Eddystone TLM™
altBeacon™
Connectable
User Defined – Fixed Payload
Advertisement 1
Disabled
Advertisement 2
Disabled
Advertisement 3
Disabled
Advertisement 4
Disabled
Advertisement 5
Disabled
Advertisement 6
Disabled
Advertisement 7
Disabled
Advertisement 8
Disabled
Advertisement 9
Disabled
Advertisement 10
Disabled
Advertisement Interval
30ms - 18hrs
Advertisement 1
Disabled
Advertisement 2
Disabled
Advertisement 3
Disabled
Advertisement 4
Disabled
Advertisement 5
Disabled
Advertisement 6
Disabled
Advertisement 7
Disabled
Advertisement 8
Disabled
Advertisement 9
Disabled
Advertisement 10
Disabled