System information

56
3.4 RESTORE DEFAULTS
Use this function to reset all dome settings to factory default parameters, including:
Dome Address 0
Baud Rate 2400bps
120Ω matching resistance Off
Soft Address Off
Azimuth Zero Zero angle
Auto Focus Auto
Zoom Limit Max Optical Zoom
Zoom Speed High
Low Light Limit On
IR Cut Filter Auto
Backlight Comp Off
AE Mode Auto
Exposure Comp 7
White Balance Auto
Auto Flip On
Proportion Pan On
Park Time 5 seconds
Park Action None
Scan speed 28 °/second
Preset Image Freeze Off
Limit Stops Off
Alarm Resume On
Alarm Sequence 5 seconds
Alarm Rest Delay 5 seconds
Alarm Inputs Off
AUX1/AUX2 NC
AUX1/AUX2 Dwell Time 0 second
Alarm Display On
Time Display Off
Display of Zoom, Azimuth/Elevation and Preset Label display Display for 2 seconds
3.5 RESTORE CAMERA
Use this function to reset all camera settings to factory default parameters
3.6 REBOOT DOME
Use this function to reboot the system.
3.7 LANGUAGE
The language used for the on-screen menus. Available languages include Chinese and English.
GB