System information

ManualsBrandsElvox ManualsHome building and DecorTelecamera speed dome IR Speed Dome

3.3.3 MOTION SETTINGS

The MOTION menu is displayed in two pages, as shown in Figure 3.3.12 and Figure 3.3.13.

MOTION

AUTO FLIP ON

PROPORTIONAL PAN OFF

PARK TIME 5

PARK ACT NONE

SCAN SPEED 40

IMAGE FREEZE OFF

DOME SPEED MID

BACK EXIT

MOTION

PRESET SPEED 4

LIMIT STOP OFF

SETTINGS STOP

CLEAR STOPS

ELEVATION SET ON

BACK EXIT

Figure 3.3.12 Figure 3.3.13

- AUTO FLIP

The dome will rotate 180 degrees when the camera tilts downward and goes just beyond the vertical position. When the dome

rotates (flips), the camera starts moving upward as long as you continue to hold the joystick in the down position. Once you let

go of the joystick after the dome rotates, joystick control returns to normal operation. The auto-flip feature is useful for following

a person who passes directly beneath the dome. This function can be realized by image center flip depending on different ca-

mera models.

- PROPORTIONAL PAN

When the PROPORTIONAL PAN is set to ON, the dome will automatically reduce or increases the pan and tilt speeds in pro-

portion to the amount of zoom. At telephoto pan and tilt speeds will be slower for a given amount of joystick deflection than at

wide zoom settings. This keeps the image fast on the monitor when there is a large amount of zoom.

When the PROPORTIONAL PAN is set to OFF, it will be difficult to trace the object at low pan and tilt speeds or no movement

in large amount of zoom.

Note: This feature is enabled all the time while setting the patterns.

- PARK TIME

This feature allows the dome to begin a specified operation (scan, preset, or pattern) after a configured period of inactivity. Park

time can be configured from 5 to 720 seconds.

Note: If no control signal is received for a period of time under the following circumstances, no automatic actions will be per-

formed:

1. In the process of performing dome actions by callup of special presets; 2. In the process of performing external alarm response

actions.

- PARK ACTION

This feature will define the activity when the dome parks. The selectable park actions include: presets1-8, pattern 1-4, patrol 1-

8, pan scan, tilt scan, random scan, frame scan, panoramic scan, day mode, night mode, or none.

- SCAN SPEED

Scan speed is the degrees per second of the pan scan, tilt scan, frame scan, random scan and panoramic scan. Scan speed

is adjustable from 1 to 40 degrees per second through the camera menu.

- IMAGE FREEZE

This feature freezes the scene on the monitor when going to a preset. This allows for smooth transition from one preset scene

to another. Preset freeze frame also reduces bandwidth when used with digital network systems and guarantees that blanked

areas will not be revealed when going to a preset.

- DOME SPEED

The manual dome movement speed can be set to HIGH, MID or LOW.

- PRESET SPEED

The speed of preset callup can be set from level 1 to 8. The higher level corresponds to the faster preset callup.

- LIMIT STOPS

Limit stops are configurable stops that limit the pan and tilt range of the dome. There may be left/right and up/down limit stops

configurable to define an area. When the LIMIT STOP function is set to OFF, the movement of dome will not be limited despite

of defined limit stops.

- SETTING LIMIT STOPS

To set limit stops manually:

1. Enter the SETTING STOPS menu.

2. Follow the directions (SET LEFT LIMIT) displayed on the monitor and use the joystick or the direction buttons on DVR front

panel to the desired location of left limit stop.

3. Press the IRIS + button to finish the setting of left limit stop.

4. Follow the same steps to set the right, up and down limit stops in sequence according to the directions displayed on the

monitor.

The new settings of limit stops will overwrite the existed settings.