System information

GB
41
2.3 Presets with Special Functions
The following presets are predefined with special functions:
Call Preset Function Call Preset Function
33 Auto flip 93 Set manual limit stops
34 Pan zero 94 Remote reboot
35 Patrol 1 95 Access main menu
36 Patrol 2 96 Stop a scan
37 Patrol 3 97 Start random scanning
38 Patrol 4 98 Start frame scanning
39 IR cut filter in 99 Start pan scanning
40 IR cut filter out 100 Start tilt scanning
41 Pattern1 101 Start panorama scanning
42 Pattern2 102 Patrol 5
43 Pattern3 103 Patrol 6
44 Pattern4 104 Patrol 7
92 Enable limit stops setting 105 Patrol 8
Note: In Manchester code control, the presets predefined with special functions are shown as below:
Set Preset Function Call Preset Function
65 Remote reboot 67 Auto flip
66 Access main menu 70 Start pattern1
69 Stop programming pattern 71 Start pattern2
70 Program pattern1 72 Start pattern3
71 Program pattern2
72 Program pattern3
2.4 Label Display
The dome allows you to configure how labels are displayed on the monitor. The following labels are available:
Zoom: Identifies the amount of magnification.
Direction: Displays compass direction, with the format of NEXXX TXXX. The XXX following NE refers to the degrees in northe-
ast direction, while the XXX following T indicates the degrees in vertical position. The north direction can be set by menu. E.g.,
NE235 T035 indicates the current position of the dome is in 235 degrees in northeast and 35 degrees in vertical position.
Alarm Message: Displays activated alarm message.
Time: Support for time display.
Preset Title: Identifies preset being called.