Installation manual

Step 2: Install pole adapter

Feed the control line, video cable and power cable through the central opening and secure the three stainless steel straps to

the pole, and finally use the screwdriver to fasten the screws at the steel straps.

Note: For outdoor applications, please adopt the water-proof measures.

Step 3: Install wall mount assembly

Screw four hex screws with the spring washers to the pole adapter through the wall mount and gasket.

5.2 Pole Mounting Instructions

The pole mounting is applicable to the indoor/outdoor solid pole construction which should comply with the following moun-

ting requirements:

- The diameter of pole must be constituent with the mounting dimensions of the stainless steel straps.

- The pole construction must be capable of supporting up to 8 times the total load of the dome and its accessories.

Step1: Assemble the pole mount adapter

Use a screwdriver to loosen the three stainless steel straps and then insert them through the rectangle holes on the pole adap-

ter.