User manual

Chapter 2 Installation

2.1 Hardware installation

2.1.1 Installation steps

1. Open packing case, and check the integrity;

2. Take out things needed during installation;

3. Connect cables needed (video signal input cable, audio signal input cable, RS485 cable and cable

for LAN);

4. Take out stabilizer power supply and power on.

2.1.2 Installation notice

Please read the following notice carefully. If you have any question, please contact us.

Notice:

1. After Opening the packing box, please check carefully to confirm that the goods in it are consistent

with list;

2. Please read user manual carefully before installation;

3. Please power-off all related equipments before installation;

4. Please check the voltage of power supply to avoid voltage mismatch;

5. Installation environmental: Do not use it under humidity and high temperature; to keep ventilation

vent freely, avoid being walled up; keep them horizontally, avoid setting up in the vibration surroun-

dings.

2.2 Panel description

Front panel:

4/12

52WS/4

Interface Instruction (From left to right in turn)

1. Tx/Rx indicator lamp;

2. Link indicator lamp;

3. Power supply indicator lamp;

123