User manual

CCTV

Buttons Description

means the dome rotate up. means the dome rotate up left. means the dome

rotate up right means the dome rotate down. means the dome rotate left down.

means the dome rotate right down. means the dome rotate left. means the

dome rotate right. means the dome stop rotating.

Drag the scroll bar to adjust rotating speed of the dome.

'Iris' button. Click button near 'Iris' button to increase light of the dome. Click

button near 'Iris' button to decrease light of the dome.

'Zoom' button. Click button near 'Zoom' button to zoom in the locale picture of this

camera. Click button near 'Zoom' button to zoom out the locale picture of this

camera.

'Focus' button. Click button near 'Focus' button to have long focus. Click

button near 'Focus' button to have short focus.

Go to the Preset

Select and do auto cruise

Track

Auto scan

Wiper button

Light button

Click the right mouse on the live interface to display a pull-down menu as below

Fig 7-4 Right Key Sub Menu

Stream: this DVR supports master stream and sub stream. Master stream has higher frame rate, max 25 fps（PAL）/30 fps（

NTSC）for every channel, but it needs higher network bandwidth; second stream has low frame rate, max 6FPS （PAL）/7FPS

（NTSC） for every channel, but it requires low network bandwidth as compared to the master stream. Therefore, users can

select the stream according to their bandwidth.

All to master/sub stream: Set all channel to master stream or sub stream.

Enable audio: Enable or disenable audio

Full screen: The live preview picture will display in full screen and the tool bar will be hidden; double click left or click right

mouse to return.

Zoom in: Single channel large screen electronic amplification. Click the channel which needs to be zoomed. Right click to

select zoom in button to zoom in the image. Double click or right click to exit.

7.4 Remote Playback & Backup

7.4.1 Remote Playback

Click button to enter into record playback interface. Refer to Fig 7-5:

Select the record date and channels and double-click the file name in the record file list box. Then user can play that file and

preview the picture.