User manual

61
EN
CCTV
2 Hardware Installation
Notice: Check the unit and the accessories after getting the DVR.
Please don’t power up the unit till the physical installation is complete.
2.1 Install Hard Drive
Notice: 1. This series support one SATA hard drives. Please use the hard drive the manufacturers recommend specially for
security and safe field.
2. Please calculate HDD capacity according to the recording setting. Please refer to “Appendix B Calculate Recording
Capacity”.
Step1: Unscrew and Open the top cover
Step2: Connect the power and data cables. Place the HDD onto the bottom case as Fig 2-1.
Step3: Screw the HDD as Fig 2-2
Fig 2-1 Connect HDD Fig 2-2 Screw HDD
2.2 Front Panel Descriptions
Notice: The front panel descriptions are only for reference; please make the object as the standard.
Name Description
REC When recording, the light is blue
Net When access to network , the light is blue
Power Power indicator, when connection , the light is blue
Fn Switch the output between VGA and BNC
USB port
To connect external USB devices like USB flash, USB HDD for
backup or update firmware; or connect to USB mouse
2.3 Rear Panel Instructions
Fig 2-3 Rear Panel for 4-ch
Item Name Description
1 Audio in 2-CH Audio inputs
2 Video in Video input channels from 1-4
3 Audio out Audio output, connect to the sound box
4 Video out Connect to monitor
5 VGA port VGA output, connect to monitor
6 HDMI port Connect to high-definition display device
7 LAN Network port
8 USB port Connect USB mouse or connect external USB devices
9 DC12V POWER INPUT
10 RS485
Connect to speed dome or keyboard（A is TX+, B is TX-
）