User manual

91
EN
CCTV
6.9.2 Remote Backup
Click Backup button to enter into backup interface. Refer to Fig 6-9:
Fig 6-9 Remote Backup Interface
Step1: Select channels, set the start and end time and then click “search’ button to display the file information in the file list box
Step2: Select backup files and click “browse” button to set the path. Then click “backup” button to start backup. The backup
files will be saved on user’s PC.
6.10 Remote System Configuration
You can do remote setup of the device which includes functions like basic configuration, live configuration, record
configuration, schedule configuration, alarm configuration, network configuration, PTZ configuration and user configuration.
You should select an option from the menu list on the left and then setup the relative parameters. Only one user can do
configuration at a given point of time. Click Config tab to enter into the below interface as Fig 6-10:
Fig 6-10 Remote System Configuration
The sub menu list and the options in every menu are similar to that of the DVR. Please refer to Chapter 4 Main Menu Setup
Guide for more details.
6.11 Tools
Click on tool’s tab to access the disk management tool. You can view the status of the HDD, change/view the read/write
properties and can also format the HDD remotely.