User manual

CCTV

5 Search, Playback & Backup

Search configuration includes four submenus: time search, event search, file management and image.

5.1 Time Search

Step1: Enter into MenuÆSearch ÆTime search tab. Refer to Fig 5-1:

Fig 5-1 Search Configuration-Time Search

Step2: Select date and channels on the right hand side and press “Search” button. A date with highlighted borderline indicates

presence of data.

Step3: Set the start time by clicking a particular grid or by entering the specific value in the start time field.

Step4: Select the channel display mode and click

button to play record. Use the playback toolbar to control the playback.

Note: When the monitor resolution is set to VGA800*600, Part of the time search interface will be hidden. Click the “Expand to”

button to expand the whole interface.

Playback Buttons

The method of record backup during a certain period in the playback interface:

Select the start time by dragging the slider and click

icon. Then select the end time and click this icon again to confirm the

record period. Next, click

icon to backup the record during this period.

5.2 Event Search

Step1: Enter into MenuÆSearchÆEvent Search tab. Refer to Fig 5-2:

Fig 5-2 Search Configuration-Event Search

Step 2: Select date and channels on the right hand side. A data with highlighted borderline indicates presence of data.

Step 3: Then checkmark Motion, Sensor or All accordingly. You can search for motion based recording and sensor based recording.

Step 4: Press “Search” button to display the searched event information in the event list box.

Step 5: Double click the event item to play the record.