User manual

CCTV

2.4 Remote Controller

It uses two AAA size batteries.

• Open the battery cover of the Remote Controller.

• Place batteries. Please take care of the polarity (+ and -).

• Replace the battery cover.

Note: Remote controller can be selected depending on the product model. Here we will take the bigger remote

controller as an example to describe.

Fig 2-6 Remote Controller

Button Function

Power Button

Switch off—to stop DVR. Use it before turning off the power

Record Button To record manually

-/-- /0-9 Digital Button Input number or choose camera

Fn1 Button Unavailable temporarily

Multi Button To choose multi screen display mode

Next Button To switch the live image

SEQ To enter into auto dwell mode

Audio To enable audio output in live mode

Switch To switch the output between BNC and VGA

Direction button

To move cursor in setup or pan/title PTZ

Enter Button To confirm the choice or setup

Menu Button To enter into menu

Exit Button To exit the current interface

Focus/IRIS/Zoom/PTZ To control PTZ camera. Move camera/zoom/IRIS/Focus

Preset Button To enter into preset setting in PTZ mode

Cruise Button To enter into cruise setting in PTZ mode

Track Button To enter into track setting in PTZ mode

Wiper Button To enable wiper function in PTZ mode

Light Button To enable light function in PTZ mode

Clear Button To return to the previous interface

Fn2 Button Unavailable temporarily

Info Button Get information about DVR like firmware version, HDD information

To control playback. Play/Pause/Stop/Previous Section/Next

Section/Rewind/Fast Forward

Snap Button To take snapshots manually

Search Button To enter into search mode

Cut Button To set the start/end time for backup in playback mode

Backup Button To enter into backup mode

Zoom Button To zoom in the images

PIP Button To enter into picture in picture setting mode

Note: You shall press P.T.Z button to enter into PTZ setting mode, choose a channel and press P.T.Z button again to hide the

P.T.Z control panel. Then you can press preset, cruise, track, wiper or light button to enable the relevant function.