User manual

101
EN
CCTV
Config interface
Information view
7.5 By Phones with Blackberry OS
1. Open the browser of BlackBerry phone and enter sever address
2. Click “Supercam” to link
3. Click “Download” button on the popup interface and the download progress will be shown.
4. Finished downloading, the software will be installed automatically.
Note: If the software fails to download, please check in accordance with the following steps:
4. Check whether the network of mobile phone is normal or not
5. Check whether DVR server connect network normally or not
6. Modify the option of Browser Configuration.
(1) Enter into Menu->Option->Browser Configuration; Refer to the following figure on the left.
(2) Enter into Menu->Option->Cache Operations, clear up browser cache. Refer to the below picture on the right:
Alarm setting
If Audio alarm is enabled, when Video
Loss/Sensor/Motion happen ， sound alarm will be
triggered; If shake Alarm is enabled, when Video
Loss/Sensor/Motion happen ， shake alarm will be
triggered.
Storage setting
User can setup the relevant parameters of mobile
video. This function can be valid only insert SD card.
Display setting
User can setup display order or display mode.