Use Instructions

22
Warnings
• Only use the Elvie Charging Cable; do not substitute
• Only use Elvie manufactured parts with Elvie Pump, including the Charging
Cable; do not substitute.
• It is recommended to use an adaptor compatible with both IEC 60601-1
and your regional power source
• Do not drop or insert any foreign object into any openings on the Hub and
always close the Charging Cap after charging
• Never operate an electrical device if it has been damaged, is not working
properly, or has been dropped into water. If damage is found, immediately
discontinue use and email [e-mail] or call Elvie customer care
on [phone] (UK) or [phone] (US). In case of damage
or wear, please replace parts
Precautions
• Elvie Pump will not work when connected to the charger. Always disconnect
Elvie Pump from the charger and close the Charging Cap before using
• Email [e-mail] or call customer care on [phone]
(UK) or [phone] (US) and discontinue use if you notice a loss
of power or if the fully charged battery lasts for less than two hours of
continuous use. The battery is not replaceable
4. Getting started