RIGVISION RVM-5P-HDR 5" 4K On-Camera HDMI Monitor USER MANUAL
THANK YOU FOR CHOOSING ELVID. The compact and lightweight full-HD RVM-5P-HDR is a feature-rich on-camera monitor that delivers extremely sharp images whether you’re shooting with a DSLR or a pro camcorder. It boasts a daylight-viewable LCD touchscreen that allows you to access menus and control functions. In addition, a simple double-tap on the screen activates 1:1 pixel mode that offers a view of your video at full resolution.
Precautions ������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������4 Overview ���������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������
PRECAUTIONS • Exposure to high sound levels can cause permanent hearing loss. Avoid listening at high volumes for extended periods of time. • Keep this product away from water and any flammable gases or liquids. • Do not expose this product to humidity or extreme heat or cold. • Make sure this product is powered off when plugging it into a power source. • Use only the correct, recommended voltage. • Do not attempt to disassemble or repair this product.
OVERVIEW DC output (Dummy battery connection) Battery plate Battery terminals Battery plate lock Battery plate slot MENU EXIT OFF ON HDMI IN HDMI OUT DC 7~24V Touch screen USB port Scroll wheel 1/4-20 socket Exit button Function buttons DC input Power switch HDMI input Headphone output HDMI output 5
PRODUCT CONTENTS 1. 2. 3. 4. 5. 6. 7. 5 in.
GETTING STARTED ATTACHING THE BATTERY PLATE INSTALLING A BATTERY The monitor’s built-in battery plate accommodates an NP-F type battery. This allows you to power the monitor with a readily available battery type that you may already own. For more information on compatible battery types, see Specifications below. 1. Place an NP-F style battery into the battery plate, making sure the plate’s contacts align with the battery terminals. 2. Slide the battery toward the contacts until it’s firmly in place.
USING THE RIGVISION MONITOR ACCESSING THE MENUS FUNCTION BUTTONS To get the most out of the monitor, make sure the monitor’s settings are properly configured. All of the setting configurations are located in the main menu, which has six submenus: Guides, Video Config, System Config, LUT Config, Function Setup, and Firmware. The four function buttons (F1–4) on the top of the monitor engage monitor functions that can be programmed to accommodate your specific needs.
TOUCH-SCREEN FUNCTIONS Function Button Setup Menu To change the functions of the buttons, follow these steps: Touch-screen functions are active only when the monitor receives a video signal. 1. Press the scroll wheel to open the main menu. 2. Select Function Setup, and press the scroll wheel to open the Function Setup menu. 3. Scroll to the function button you want to change, and press the scroll wheel to activate the menu item. 4.
GUIDES MENU GUIDES Adjusts the aspect ratio of the incoming video signal and how it is displayed on-screen. Select between Off (default), 80%, 90%, 15:9, 1.33:1, 1.5:1, 1.85:1, 2:1, 2.35:1, and Custom. • H (Custom): 100%–1%. Default value is 80%. • V (Custom): 100%–1%. Default value is 80%. GUIDE MASKS (On, off) When turned on, the areas outside the guide are dimmed. The default setting is On. CROSSHAIR (On, off) Puts a crosshair at the center of the screen. The default setting is Off.
VIDEO CONFIG MENU BRIGHTNESS Adjusts the monitor’s brightness value from 0–100. The default setting is 50. CONTRAST Adjusts the contrast value of the on-screen image from 0–100. The default setting is 50. CHROMA Adjusts the chroma value of the on-screen image. The default setting is 50. SHARPNESS Adjusts the value of fine detail of the picture from 1–100 in increments of 10. The default setting is 30. TINT Adjusts the tint value from 0–100. The default setting is 50.
SYSTEM CONFIG MENU OSD LANGUAGE You can set the on-screen language to English (default) or Chinese. OSD DURATION Set the length of time the on-screen menu is displayed. Select 5, 10 (default), 15, 20, 25, or 30 seconds, or off (the menu will be displayed until the user exits the menu). OSD TRANSPARENCY Set the menu’s level of opacity. You can adjust this setting to low (default), middle, high, and off, with high being the most transparent. The default setting is low, which makes the menu opaque.
LUT CONFIG MENU This menu allows you to apply 17×17×17.cube LUT files to color grade your footage. STORED FROM USB Select or switch to a different LUT file that’s stored in the monitor’s memory. To delete a LUT file, select the file, and press and hold the scroll wheel until you’re prompted to confirm the deletion. USB LOOKS Select this option to navigate through the files on a connected USB drive and move LUTs from the USB drive to the monitor.
FUNCTION SETUP MENU SHARPNESS2 This menu sets the functions for the four function buttons on the top of the monitor. Adjusts the value of fine detail of the picture from 1–100. The default setting is 30. Available functions: TINT2 AUDIO METERS Adjusts the tint value from 0–100. The default setting is 50. Displays left- and right-channel audio meters on-screen. Position options are top, left, division, right, and bottom. The default setting is top.
H/V DELAY3 ZEBRA1 H/V delay mode highlights the horizontal and vertical blanking portions of the incoming signal. Press the function button to switch between three delay modes. (1) H & V mode delays both horizontal and vertical sync. (2) V mode delays the vertical sync. (3) H mode delays the horizontal sync. Turning on displays animated black and white stripes through areas of the image that are overexposed along with an on-screen under and over warning display.
CAMERA CONTROL FUNCTIONS When a camera control accessory (available separately) is attached to the monitor’s HDMI ports, activate Camera Control to operate the camera via the touch screen. Select between Canon, Sony, Panasonic, BMPCC, Z CAM E2, and Remote functions. Each selection will bring up a control screen with the following available functions: CANON Zoom Adjustment Screen Zoom select Record (Other icons are hidden during recording.
Shutter Speed Adjustment Screen Shutter-speed select Shutter speed controls ISO Adjustment Screen ISO select ISO controls 17
SONY Record Zoom in/out controls Camera trigger Autofocus (Press and hold, and then swipe up to trigger the camera.) PANASONIC Record Zoom in/out controls Camera trigger Autofocus (Press and hold, and then swipe up to trigger the camera.
BMPCC Zoom Adjustment Screen Zoom select Record Focus controls (When adjusting the focus, peaking will automatically activate for approximately a half second, and then turn off.
REMOTE Trigger Focus (Press and hold, and then swipe up to trigger the camera.
Aperture Adjustment Screen Aperture select Aperture controls Focus Adjustment Screen Focus select Focus controls (When adjusting the focus, peaking will automatically activate for approximately a half second, and then turn off.
FIRMWARE MENU Information about firmware updates and version history is available at elvidcinema.com. FIRMWARE VERSION INFORMATION Select Version Information in the Firmware menu, and press the scroll wheel. The current firmware version will appear on-screen. FIRMWARE UPDATE To update the firmware, follow these steps: 1. Go to the Elvid homepage at www.elvidcinema.com, and click on the link to the Downloads page. 2. In the Select Your Model drop-down menu, select RVM-5P-HDR. 3.
SPECIFICATIONS Display Size 5 in. (12.7 cm) Panel Type IPS LCD touchscreen Backlight LED Screen Resolution 1920 × 1080 Aspect R tio 16:9 Viewing Angle 160° (L/R) 160° (U/D) Brightness 450/1000/1500 cd/m2 Contrast Ratio 1000:1 Dot Pitch 0.01925 × 0.05775 mm Bit Depth 8 bit Finish Matte black Controls Scroll wheel, Function buttons (×4), Exit button, Touch screen Connectors HDMI input, HDMI output, 3.5 mm headphone output, 5.5 mm barrel output, USB 2.
ONE-YEAR LIMITED WARRANTY This Elvid product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later.
ELVID ® A Gradus Group Brand GG2
