RIGVISION RVM-5P-HDR 5" 4K On-Camera HDMI Monitor QUICKSTART GUIDE
THANK YOU FOR CHOOSING ELVID. The compact and lightweight full-HD RVM-5P-HDR is a feature-rich on-camera monitor that delivers extremely sharp images whether you’re shooting with a DSLR or a pro camcorder. It boasts a daylightviewable LCD touchscreen that allows you to access menus and control functions. In addition, a simple double-tap on the screen activates 1:1 pixel mode that offers a view of your video at full resolution.
PRECAUTIONS • Exposure to high sound levels can cause permanent hearing loss. Avoid listening at high volumes for extended periods of time. • Keep this product away from water and any flammable gases or liquids. • Do not expose this product to humidity or extreme heat or cold. • Handle this product with care. Avoid any impacts to this product. • Do not block the vents in this product. • Disconnect this product from its power source before storage and during electrical storms.
BOX CONTENTS • • • • 5 in.
OVERVIEW Touch screen Scroll wheel Exit button Function buttons 6 Power switch
DC output (Dummy battery connection) Battery plate Battery terminals Battery plate lock Battery plate slot MENU EXIT OFF ON HDMI IN HDMI OUT DC 7~24V USB port 1/4-20 threaded socket DC power input port HDMI in port Headphone output HDMI output port 7
POWERING OPTIONS ATTACHING THE BATTERY PLATE AND BATTERY 1. Move the battery plate lock to the unlocked position. 2. Place the battery plate down into the battery slot, making sure the battery plate contacts and guide tabs match the contacts and tabs in the battery slot. 3. Slide the battery slot toward the contacts until it’s snug, and move the locking switch to the locked position. 4. Place an NP-F style battery into the battery plate, making sure the plate’s contacts align with the battery terminals. 5.
POWERING ON 1. Connect the HDMI input port to your camera’s output port with an HDMI cable. 2. Move the Power switch to the on position. POWERING A CAMERA The battery plate has an integrated DC output that can power your camera via the dummy battery. 1. Plug the barrel connector into the DC output on the battery plate. 2. Insert the dummy battery into the camera’s battery compartment.
USER INTERFACE MENUS 1. Press the scroll wheel to open the main menu. 2. Use the main menu to select one of the submenus: Guides, Video Config, System Config, LUT Config, Function Setup, and Firmware. 3. Turn the scroll wheel to navigate to the desired submenu, and press the scroll wheel to open it. To close the main menu and return to the main view, press the Exit button. SUBMENUS 1. In the submenu, scroll to highlight the item you want to adjust, and press the scroll wheel. 2.
Selecting Back at the bottom of each submenu returns you to the main menu. To return to the main view without making or changing a menu selection, press the Exit button. RESETTING THE RVM-5P-HDR To erase all settings and return to the factory presets: 1. Open the main menu, and select System Config. 2. In the System Config menu, scroll down to System Reset, and press the scroll wheel. 3.
The function buttons are active only when the monitor receives a video signal. • Press the function button to turn the function on and off. • Press and hold the function button to activate the function’s menu. Then use the scroll wheel to select menu options, set values, and exit the menu. To change the functions of the buttons, follow these steps: 1. From the main menu, select Function Setup. 2.
TOUCH-SCREEN FUNCTIONS Touch-screen functions are active only when the monitor receives a video signal. Touch the screen once to bring up the signal status and settings menu and the four function displays. • Touch any of the functions to turn them on and off. • Touching the signal status and settings menu opens the main menu. • Touching a non-menu portion of the screen or pressing the Exit button clears the screen and returns you to the main view.
FIRMWARE UPGRADE Information about firmware updates and version history is available at elvidcinema.com. To check the current firmware version, follow these steps: 1. From the main menu, select Firmware. 2. In the Firmware menu, select Version Information to display the current firmware version. For complete information about firmware upgrades, see the online user manual and product notices at elvidcinema.com.
SPECIFICATIONS Display Size Panel Type Backlight Screen Resolution Aspect Ratio Viewing Angle Brightness (nit) Contrast Ratio Dot Pitch Bit Depth Controls Connectors Input Voltage Power Consumption Construction Dimensions (H × W × D) Weight 5 in. (12.7 cm) LCD Touchscreen LED 1920 × 1080 16:9 160° (L/R) 160° (U/D) 450/1000/1500 cd/m2 1000:1 0.01925 × 0.05775 mm 8 bit Scroll wheel, Function buttons (×4), Exit button, Touch screen HDMI input, HDMI output, 3.5 mm headphone output, 5.
ONE-YEAR LIMITED WARRANTY This Elvid product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later.
