User Manual

FUNCTION

SCAN

Determines how the image is displayed based on the settings

in the Aspect and Zoom menus below. Selecting Aspect or

Zoom activates the Aspect or Zoom menus. Selecting Pixel-to-

Pixel turns off scaling and displays the incoming video signal

in its native resolution and aspect ratio with 1:1 pixel mapping.

ASPECT

Available only when Aspect is selected in the Scan menu.

Adjusts the aspect ratio of the incoming video signal and how

it is displayed on-screen. Available settings are Full (default),

16:9, 1.85:1, 2.35:1, 4:3, 3:2, 1.3X, 2.0X, and 2.0X MAG.

UNDERSCAN

If the image exceeds the area of the monitor, turn on this

feature to display a blank area around the active image so you

can clearly see the edges of the active video area. The default

is set to off.