User Manual

2. Screw the 1/4-20 screw

into the socket, and

tighten it with the hex key.

3. Screw the ballhead into

a 1/4-20 socket until it’s

snug.

4. Screw the monitor onto the ballhead, and secure it by

tightening the locking wheel.

CONNECTING TO A CAMERA

HDMI: Connect the monitor’s HDMI input to a camera with an

HDMI output.

SDI: Connect the monitor’s SDI input to a camcorder or camera

with an SDI output.

OUTPUTTING THE SIGNAL

Use the HDMI and SDI output to send the signal to a monitor

or recorder.

POWERING ON

1. Connect a battery or DC power source.

2. Switch the power switch to the on position.