User Manual

P2P: Pixel-to-Pixel mode turns off scaling and displays the

incoming video signal in its native resolution and aspect

ratio with 1:1 pixel mapping. If the picture is larger than the

monitor’s 1280 × 800 resolution, the center of the image will

appear on-screen.

Histogram: Selecting On activates histogram mode, which

indicates the overall level of exposure from light to dark. It

shows the percentage of the image at a particular exposure

level.

False Colors: Selecting On replaces the true colors of the

image with a standard set of colors, displayed in an on-screen

chart, that represents exposure levels. The higher—or hotter—

the exposure, the higher the color will be in the chart.

Zoom: Zooms into the center of the image. Select between

magnication factors of 4×, 9×, 16×, and auto (default).

Anamorphic: For use with anamorphic lenses. Corrects your

image according to your aspect ratio. Select between 1.3×, 2×,

2.0 MAG, and off.

Focus Assist: Focus Assist removes color from the image and

adds a red outline to any part of the image that is in focus.

Note: Check Field Mode is not available when focus assist is on.

Peaking Color: Changes the color of the focus assist outline.

Select between red, green, or blue, or outlines.

Over Exposure: Selecting On displays animated black

and white stripes through areas of the image that are

overexposed. Select on or off.