User Manual

21
Camera Mode: Camera mode scales the incoming video signal
to ll the screen. This is useful when shooting on a DSLR.
Select off (default), 480P, or 1080i.
ZOOM All: Zooms into the center of the image. Values range
from 0 (default) to 100.
OSD Time: Set the length of time the on-screen menu is
displayed. Select 10, 20, or 30 seconds (default), or off (the
menu is displayed until you manually exit).
U/D ZOOM: Stretches the picture vertically to t the screen.
L/R ZOOM: Stretches the picture horizontally to t the screen.
Note: U/D Zoom and L/R Zoom will change the aspect ratio of
your picture.
Backlight: Adjusts the intensity of the backlight from 0 to
100.
Power On: When auto is selected, the FieldVision 4KV2 will
turn on automatically when you attach a power supply. In
manual mode (default), press the power button to turn the
monitor on.
USB Upgrade: Contact Elvid customer support to see if there
is a rmware update for your monitor.
Reset: Pressing the Right Nav button resets the FieldVision
4KV2 to the factory default settings.