Manualshelf

User Manual

ManualsBrandsElvid ManualsMonitors7" 4K On-Camera Monitor with Battery, Articulating Arm, and HDMI Cable Kit
12345678910
10
To turn on the FieldVision 4KV2, press the power button on
the front panel of the monitor. The FieldVision 4KV2 will
turn on and enter standby mode (yellow indicator LED).
A battery monitor appears at the top of the screen and
displays the remaining battery charge.
Note: The power indicator glows red in standby mode while
connected to a power source.
AC POWER
To run the FieldVision 4KV2 with AC power, use a 12 V DC
adapter (not included) to connect the FieldVision 4KV2’s
DC power input to your AC power source.
To turn on the FieldVision 4KV2, press the power button.
The FieldVision 4KV2 will turn on and enter ready mode,
and the power indicator LED will turn green.