FIELDVISION OCM-7B-4KV2 7˝ 4K IPS Monitor USER MANUAL
THANK YOU FOR CHOOSING ELVID. The Elvid FieldVision 4KV2 is a lightweight 7-inch on-camera monitor that’s capable of displaying signals up to UHD 4K (3840 × 2160) and DCI 4K (4069 × 2160). The LCD panel’s native resolution of 1920 × 1200 provides a sharp image and facilitates precise color rendering. It offers an aspect ratio of 16:10 (native) that you can set to your preferred size along with four zoom presets.
PRECAUTIONS • Exposure to high sound levels can cause permanent hearing loss. Avoid listening at high volumes for extended periods of time. • Keep this product away from water and any flammable gases or liquids. • Do not expose this product to humidity or extreme heat or cold. • Handle this product with care. Avoid any impacts to this product. • Do not block the vents in this product. • Disconnect this product from its power source before storage and during electrical storms.
TABLE OF CONTENTS Overview...............................................................................................6-7 Product Contents................................................................................... 8 Powering Options..............................................................................9-10 Using the OCM-7B-4KV2................................................................11-12 The HDMI Lock.................................................................................
OVERVIEW FIELDVISION 4K HR MODE MENU Screen Mode button Left Nav/Vol Right Nav/Vol + Menu button Down Nav/F1 button 6 /F1 /F2 F3 F4 Status LED Power button F4 button F3 button Up Nav/F2 button
Headphone jack OSD controller port USB port DC 12V HDMI AV OSD USB Sunshade slots HDMI lock mount Speaker DC power input Battery plate HDMI input 1/4″-20 threaded socket AV input 7
PRODUCT CONTENTS ·· 7 in. On-Camera Monitor ·· Mini HDMI to HDMI cable ·· Shoe-mount ball head ·· HDMI lock collar ·· Sunshade mounting frame ·· Sony L-Series battery mount ·· Sunshade Note: For additional battery plates and adapters compatible with other popular brands, visit elvidcinema.com.
POWERING OPTIONS There are two ways to power the FieldVision 4KV2: AC power or battery (not included). CAMERA BATTERY The FieldVision’s built-in battery mounting plate accommodates a Sony L-Series–type battery. To install a compatible battery, follow these steps: 1. Place a compatible battery in the battery plate. Make sure the battery’s bottom contacts are aligned with the contacts in the battery plate. 2. Slide the battery forward until it locks into place.
To turn on the FieldVision 4KV2, press the power button on the front panel of the monitor. The FieldVision 4KV2 will turn on and enter standby mode (yellow indicator LED). A battery monitor appears at the top of the screen and displays the remaining battery charge. Note: The power indicator glows red in standby mode while connected to a power source.
USING THE OCM-7B-4KV2 MOUNTING THE FIELDVISION 4KV2 Use the FieldVision 4KV2’s 1/4″-20 threaded socket to attach the monitor to your mounting system or the included ball head. Make sure your bracket can support the monitor. CONNECTING THE VIDEO SOURCE HDMI Input: The FieldVision 4KV2 is equipped with an HDMI input for use as a wired high-definition video monitor. 1.
Composite Video Input: To use your FieldVision 4KV2 as a wired standard-definition video monitor, you’ll need an A/V breakout cable (available separately). 1. Insert the 1/8″ (3.5 mm) plug into the A/V input on the side of the monitor. 2. Connect your composite video source to the yellow RCA jack. 3. If desired, connect your audio source to the white (L) and red (R) audio jacks. 4. Press the Mode button to cycle through the input modes until AV appears on the monitor.
THE HDMI LOCK An HDMI lock is included with the FieldVision 4KV2 to reduce stress on the HDMI plug and ensure that the plug isn’t pulled out of the input while you’re shooting. To install the HDMI lock, follow these steps: 1. Insert the HDMI cable into the HDMI port on the monitor. 2. Place the HDMI lock over the cable so the opening on the end of the plate fits onto the cable and sits flush against the cable’s strain relief. 3. Insert the HDMI locking screw into the HDMI locking socket, and tighten.
THE SUNSHADE The sunshade prevents glare on the monitor’s screen by blocking out stray light, and it is useful when shooting outdoors. To attach the sunshade to the monitor, follow these steps: 1. Match the pegs of the mounting frame with the slots on the back of the monitor. 2. Gently spread the ends of the mounting frame, and press them down onto the monitor until the tabs lock into the slots on the back of the monitor. 3.
FRONT PANEL BUTTONS For greater efficiency while using the FieldVision 4KV2, you can use the buttons on the front of the monitor as shortcuts to various functions, instead of cycling through the on-screen menus. Mode Button: Selects between HDMI and A/V input signals. Left Navigation/Vol – Button: Lowers the volume of the monitor’s speaker. Press for incremental volume change. Press and hold to slide the volume down to a minimum value of 0. In menu mode, use this button to navigate to the previous menu.
FUNCTION BUTTONS The four function buttons (F1–4) have preset shortcuts assigned to them, but can be changed to accommodate your specific needs. See Function Button Shortcut Menu below for information on changing the function assignment for each button. F1 Button: Preset to Check Field. In Check Field mode, only the one selected color will appear on-screen. Pressing repeatedly scrolls through the screen colors (red, green, blue, or mono). F2 Button: Preset to Focus Assist.
THE MENU To get the most out of the FieldVision 4KV2, make sure the monitor’s settings are properly configured. All of the setting configurations are located in the main menu, which has four submenus: Color, On-screen Display (OSD), Function, and Function Button Shortcut. Menu Button: Pressing the menu button • accesses the menu, • returns to the previous menu or screen without making a selection, and • closes the menu.
COLOR MENU The color menu offers three preset picture modes (standard, mild, and dynamic) as well as a user mode with adjustable brightness, contrast, saturation, and sharpness settings. In all picture modes, the values of color temperature and tint can be adjusted to your specific needs. Other parameters that can be adjusted appear black, and when selected with the Up/Down buttons, a horizontal submenu icon appears next to it.
Saturation: Adjusts the value of screen color saturation from 0–100. Sharpness: Adjusts the value of fine detail of the picture from 1–100. Color Temp.: Presets are 6500 (default) and 9300. When User mode is selected, the values of red, green, and blue can be set manually from 0–255. Tint: Adjusts the tint value from 0–100.
ON-SCREEN DISPLAY (OSD) Language: You can set the on-screen language to English (default), Simplified Chinese, Spanish, Portuguese, French, Dutch, German, and Japanese. Aspect Ratio: Adjusts the aspect ratio of the incoming video signal and how it is displayed on-screen. Available settings are Panorama, Auto, 4:3, 16:9, Zoom 1, Zoom 2, and Just Scan. The default setting is Panorama. NO Signal: Set the color of the screen when there is no video signal being received.
Camera Mode: Camera mode scales the incoming video signal to fill the screen. This is useful when shooting on a DSLR. Select off (default), 480P, or 1080i. ZOOM All: Zooms into the center of the image. Values range from 0 (default) to 100. OSD Time: Set the length of time the on-screen menu is displayed. Select 10, 20, or 30 seconds (default), or off (the menu is displayed until you manually exit). U/D ZOOM: Stretches the picture vertically to fit the screen.
FUNCTION MENU Center Marker: Selecting On puts a center marker on-screen. Off is the default setting. The center marker does not appear while the menu is displayed. Close the menu to make the center marker visible. Safe Frame: Safe frame displays and adjusts the size of the on-screen safety frame markers. Press repeatedly to scroll through the safe frame settings: off (default), 80%, 85%, 90%, 93%, 96%, and 2.35:1. The safety frame will not be visible while the menu is on-screen.
P2P: Pixel-to-Pixel mode turns off scaling and displays the incoming video signal in its native resolution and aspect ratio with 1:1 pixel mapping. If the picture is larger than the monitor’s 1280 × 800 resolution, the center of the image will appear on-screen. Histogram: Selecting On activates histogram mode, which indicates the overall level of exposure from light to dark. It shows the percentage of the image at a particular exposure level.
Exposure Level: Adjusts the sensitivity of the overexposure animation. Select from 1 to 100 IRE. Embedded Audio: Displays an on-screen audio meter. Nine Grid: Turning on this feature divides the screen into a 3 × 3 grid of nine panels, any of which you can select to display at full screen. This is useful for zooming in on a specific part of the image to check or fine-tune the focus without adjusting or changing the frame. Use the left and right navigation buttons to select a panel.
FUNCTION SHORTCUT MENU This menu allows you to select or change the settings of the four function buttons on the front of the monitor. The available functions are Center Marker, Safe Frames, Check Field, Focus Assist, Aspect Ratio, Camera Mode, Image Flip, P2P, Image Freeze, Histogram, False Colors, Over Exposure, Embedded Audio, Nine Grid, Zoom, and Anamorphic. 1. Press the Menu button and use the or navigation button to scroll to the Function Button Shortcut menu. 2. Use the button.
SPECIFICATIONS MONITOR 26 Panel size 7 in. Panel type IPS Backlight LED Resolution 1920 × 1200 Brightness 400 cd/m² Contrast ratio 1200:1 Viewing angle L/R: 80°/80° U/D: 80°/80° Dot pitch (W × H) 0.07875 × 0.07875 mm Aspect ratio 16:10 Inputs HDMI, AV Outputs Composite video, headphone (3.
(CONTINUED) Supported formats (50/60 Hz) 480i/p, 576i/p: 60/59.94/ 50/30/29/25/24/23.98 720p: 60/59.94/50/30/ 29/25/24/23.98 1080i: 60/59.94/50 1080p: 60/59.94/50/ 30/29.97/25/24/24 PSF/ 23.98/23.98 PSF UHD 4K: 3840 × 2160 24/25/30 DCI 4K: 4096 × 2160 24 Threaded socket 1/4″-20 Input voltage DC: 7 to 24 V Power consumption ≤8 W Battery type Sony L-Series Dimensions (W × H × D) 6.9 × 5.1 × 0.7 in. (17.6 × 13 × 1.7 cm) Weight Without sunshade: 10 oz. (282 g) With sunshade: 13.1 oz.
TROUBLESHOOTING PROBLEM SOLUTION The FieldVision 4KV2 will not turn on. • If you are powering the FieldVision 4KV2 with a battery, make sure the battery is fully charged and properly seated in the battery plate. • Make sure that the 12 V DC adapter is fully plugged in, and that your AC power source is reliable. Try switching AC power sources. The FieldVision 4KV2 is turned on, but there is no on-screen image, or the image is weak.
PROBLEM SOLUTION The screen displays only a black and white image. • Check the brightness, contrast, hue, and saturation settings, and adjust as necessary. • Make sure the Check Field mode is turned off. The on-screen image size is incorrect. • Make sure the Camera mode is disabled. • Check whether the aspect ratio is set correctly. • Make sure that the correct input signal is selected. • Check your cables to make sure they are properly connected and that they are reliable.
FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
ONE-YEAR LIMITED WARRANTY This Elvid product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later.
ELVID ® A Gradus Group Brand 32
