Specifications

GeoDome Theater Installation and Operation Guide
Connecting the Screen Suction Fan
1. Locate the hole at the top of the dome
surrounded by Velcro. Position the suction fan on
top of this hole so that the Velcro on the fan
bottom secures to the dome. Secure the safety
locking straps on the dome to the latches to the
suction fan. (Fig. 7)
● Important: Remove all footwear before
stepping on dome material.
2. Plug the suction fan into the fan speed control
accessory. (Fig. 8)
www.elumenati.com Page 6
(Fig. 8) Connecting the speed control
(Fig. 7) Attaching the suction fan.