Specifications

GeoDome Theater Installation and Operation Guide
Projection System First Light
1. Turn the on projector using the remote control.
2. You should see the projector startup screen.
3. The projector zoom should already be at the default setting.
4. Should you need to make adjustments, use the projector remote control to adjust the
zoom to the desired amount. Figures 34 and 35 show the proper Display and Zoom
settings.
5. Adjust focus and zoom using the remote control.
● Coarse adjustment of both zoom and focus is achieved using up and down arrows.
● Fine adjustment of both zoom and focus is achieved using left and right arrows.
Projection System Teardown
1. Teardown of the projection system is simply the reverse of the above 3 steps.
www.elumenati.com Page 13
(Fig. 34) Default Display Settings.
(Fig. 35) Default zoom settings