User`s manual

Cleaning The
Print Head
As you use your printer, the printhead may be-
come dirty resulting in poor print quality.
Whenever new labels are loaded into the
printer, the print head should be cleaned with a
Cleaning Pen.
Cleaning Pens (P/N 800105-001) are available
directly from ELTRON. Supplies can be or-
dered from ELTRON by calling 1(800) 344-
4003.
Step ➊ Open the printhead assembly and remove any
labels loaded in the printer, see Figure 2-2.
Hand rewind the labels back onto the roll.
Step ➋ Gently rub the Cleaning Pen across the amber
area of the printhead.
Allow the print head to dry for 1 minute before
reloading the labels.
28
980158-001 Rev.A
Operation
Figure 2-12
Locating the
Printhead
Printhead
Figure 2-13
Printhead
Cleaning