User`s manual

Transfer Ribbon
Loading
Step ❷
Open the printhead assembly. See Figure 2-2.
Thread the transfer ribbon between the Label
Sensor Assembly and the Printhead Bracket.
Continue threading the ribbon between the
Platen (above the labels) and the Printhead.
For easy ribbon threading, slide half of ribbon
between the side of the Label Sensor Assembly
and Printhead Bracket. Guide it from the side
of printer through the ribbon path. See Figure
2-5 for a similar process used to load label
stock.
24
980158-001 Rev.A
Operation
E
R
M
O
T
O
R
2"
(50mm)
4"
(100mm)
Figure 2-10
Ribbon
Loading Path
Label
Sensor
Assembly
Printhead
Transfer
Ribbon