User`s manual

Installation The following sections will guide you through
the installation of the printer and Create-A-
Label Tools software.
Step ➊
Attach Power
Place the printer in a suitable location that al-
lows easy access to all sides of the printer. The
printer should never be operated while resting
on it’s side or upside down.
Check that the printer’s AC power receptacle
switch is in the OFF (0) position.
The printer should never be operated in a
location where the operator and printer can get
wet. Personal injury could result.
980158-001 Rev.A 7
Getting Started
I 0
ONOFF
Figure 1-1
Power
Switch
Positions
Figure 1-2
Locating the
Power Switch
Power Switch