User manual

DC Controller

UPC4 Master

User Manual

Page 99/100

9.1 Options

Article code Designation

302-UP4-DCDC.LV Power supply, DIN rail mounting, Vi=18-75 VDC; Vo=24 VDC, Imax=2.5 A

302-UP4-DCDC.HV Power supply, DIN rail mounting, Vi=85-375 VDC; Vo=24 VDC, Imax=2.5 A

301-004-395.10 Basic-Unit (BU), 3 x voltage (0-300 V), 3 x current (60 mV shunt), 2 x temperature,

one output relay, one LVD optocoupler control output

302-UP3-MMT.00 Configuration software “Multi Management Tool” (MMT)

302-003-RDD.00 Remote display for door mounting; connection via CAN interface

302-003-RDMD.00 Remote display for door mounting with mimic diagram; connection via CAN interface

302-DCC-0MM.00 Mains monitoring board 1/3 phase; DIN rail module; connection via CAN interface

302-DCC-0BM.00 Battery monitoring board DCC-BMB (for one additional battery string; V, V/2, I, T); DIN rail module; max. six

modules DCC-BMB applicable

302-DCC-DI8.00 Signalling board with 8 digital alarm inputs; DIN rail module; connected via CAN interface

302-DCC-0RB.00 Relay board with 6 isolated signalling outputs; DIN rail module; connected via CAN interface

302-DCC-0FM.00 Fuse monitoring board (20 fuses, 24-60 VDC, 1-pole); open frame

302-UP3-0SW.02 SNMP monitoring software (Win)

TBD Analog modem, GSM, DIN rail, VDC

9.2 Dimensional drawing

Figure 8. Module dimensions

47 mm