User manual

DC Controller
UPC4 Master
User Manual
Page 86/100
©2010. ELTEK VALERE DEUTSCHLAND GmbH. UM_UPC4_V2.00_E_R1.1_2011-01-04
8 Event list UPC4 (failure list)
8.1 General
Event-
no.
Event text Reference to
parameter
Description
2000 Dig. input 1[1]
(14.1), (14.2), (14.3),
(14.4)
This event is active if the 1. digital input of the 1.
digita
l input board (DI8) is active. An adjustable
delay of activation and dropout as well takes
effect. The active status is invertible (break
contact functionality).
2001 Dig. input 1[2] see event no. 2000
above
2. digital input of 1. DIB/DI8), for details please see
event no. 2000
2002 Dig. input 1[3] see event no. 2000
above
3. digital input of 1. DIB/DI8), for details please see
event no. 2000
2003 Dig. input 1[4] see event no. 2000
above
4. digital input of 1. DIB/DI8), for details please see
event no. 2000
2004 Dig. input 1[5] see event no. 2000
above
5. digital input of 1. DIB/DI8), for details please see
event no. 2000
2005 Dig. input 1[6] see event no. 2000
above
6. digital input of 1. DIB/DI8), for details please see
event no. 2000
2006 Dig. input 1[7] see event no. 2000
above
7. digital input of 1. DIB/DI8), for details please see
event no. 2000
2007 Dig. input 1[8] see event no. 2000
above
8. digital input of 1. DIB/DI8), for details please see
event no. 2000
2008 Dig. input 2[1] see event no. 2000
above
1. digital input of 2. DIB/DI8), for details please see
event no. 2000
2009 Dig. input 2[2] see event no. 2000
above
2. digital input of 2. DIB/DI8), for details please see
event no. 2000
2010 Dig. input 2[3] see event no. 2000
above
3. digital input of 2. DIB/DI8), for details please see
event no. 2000
2011 Dig. input 2[4] see event no. 2000
above
4. digital input of 2. DIB/DI8), for details please see
event no. 2000
2012 Dig. input 2[5] see event no. 2000
above
5. digital input of 2. DIB/DI8), for details please see
event no. 2000
2013 Dig. input 2[6] see event no. 2000
above
6. digital input of 2. DIB/DI8), for details please see
event no. 2000
2014 Dig. input 2[7] see event no. 2000
above
7. digital input of 2. DIB/DI8), for details please see
event no. 2000
2015 Dig. input 2[8] see event no. 2000
above
8. digital input of 2. DIB/DI8), for details please see
event no. 2000
2070 V1 <>
Vmin/max1
see Tresh. Gen. Par. Voltage 1 of general parameters. This event is
active if the assigned value is less than the
adjustable min. value and greater than the
adjustable max. value as well. A configurable
delay and hysteresis as well which is valid for all
general parameters is available.
2071 V2 <>
Vmin/max2
see event no. 2070
above
Voltage 2 of general parameters, for details
please see event no. 2070.
2072 V3 <>
Vmin/max3
see event no. 2070
above
Voltage 3 of general parameters, for details
please see event no. 2070.
2073 V4 <>
Vmin/max4
see event no. 2070
above
Voltage 4 of general parameters, for details
please see event no. 2070.