User manual

DC Controller
UPC4 Master
User Manual
Page 67/100
©2010. ELTEK VALERE DEUTSCHLAND GmbH. UM_UPC4_V2.00_E_R1.1_2011-01-04
6.9 Remote Display
In this area general settings can be made
concerning RD and RDP as well. At (22.1)
LCD contrast, at (22.2) ilumination is set.
In the area "Alt
ernate Display" it can be
set what should be displayed first on the
display:
It is possible to display element 1 = Status
+
time, element 2 = load values
(voltage/current) or element 3 = LOGO
and/or element 4 = battery remaining
time. It is also possible to let the display of
the three elements chronologically
change. The intervals can be set at (22.3).
If only one
of the three values is set >0,
than it will be displayed continuously. The
other values are hidden then.
The battery remaining time is only
disp
layed if the battery is discharged with
a current greater than 1 A.
In the area "Ba
tteries" (22.4)
*5.1
can be set
whether battery measuring values should
be hidden or not at the display.
In the area "Syst" it is
similarly valid for
load values (22.5).
In the areas "CAN De
viceArrays" (22.6)
and "General" (22.7) as well it can be set
that CAN devices and other modules
according to the list are hidden at the
display.
22.1
22.2
22.3
22.4
22.5
22.6
22.7