Operation Manual
9
UK
Option A (see g.1)
Option A is recommended if you have an older Dolby Surround or Dolby Pro
Logic amplier, receiver or processor without a dedicated low-level (line-level)
subwoofer output.
One pair of binding posts on each Power Tower is connected via high-level
(loudspeaker) cable to the amplier or receiver, and the second pair of binding
posts connected to the low-level input of the bass module using the supplied
Power Tower high-level adapter cable.
Important note: The Power Tower high-level adapter cable has been speci-
cally designed for this purpose, please do not use an unsupported substitute.
Connect the centre channel loudspeaker to the centre channel loudspeaker
output, and the surround loudspeakers to the surround loudspeaker outputs
of your amplier or receiver.
Fig.1