Specifications

Chapter 7 –Communication Performance Verification
206 PL 3120/PL 3150/PL 3170 Power Line Smart Transceiver Data Book
Table 7.1 PL 3120/PL 3150/PL 3170 Smart Transceiver Performance Verification
Manufacturer Test spec Echelon 005-00193-01 Ch 7
Product Line voltage __________VAC
Neuron Core ID
_____ _____ _____ _____ _____ _____
Line frequency __________50Hz __________60Hz
Band ______A-band ______ C-band Date tested __________/__________/__________
Coupling type ______1-Phase ______ 2-Phase ______ 3-Phase Tested by
Preliminary Checks
Fail Pass
V
A
power supply voltage
10.8V to 18.0V_________V
V
DD5
power supply voltage
4.75V to 5.25V_________V
Oscillator frequency (6.5523 to 6.5549 or 9.9980 to 10.0020MHz) _________MHz
Good Citizen Verification
Unintentional Output Noise Verification-UUT and RX analyzer with no packet transmission Fail Pass
Primary signal LEDs -72dB not “on” solid and -66dB not flashing ________dB________
Secondary signal LEDs -72dB not “on” solid and -66dB not flashing ________dB________
Packet Detect LED must not flash more than once per minute ________/min
Excessive Loading Verification - Send 10Vpp through 88.7Ω and external coupler Fail Pass
RX analyzer primary LEDs -3dB LED must be “on” or flashing ____dB____on____Flash
Transmit Performance Verification - RX analyzer reading UUT svc pin msg. 5/7Ω load
Fail Pass
RX analyzer primary LEDs 0dB LED must flash ≥6/10 tries ____dB____/10 tries
Receive Performance Verification - Send 1kpkts at 3.5Vpp through 30.1kΩ attenuator
Fail Pass
Primary Frequency
Send PLCA
Transmit
Attenuation
(Attn)
Overall
Attenuation
(Attn + 66)
Recv PLCA
UnackPri
Error%
(expected)
Recv PLCA
UnackPri
Error%
(observed)
UUT
#Pkts
Received
(observed)
UUT
Pri
Error%
(expected)
UUT
Pri
Error%
(1011-#Rcvd)/10
0 dB 66 dB <1% % <1% %
6 dB 72 dB <3% % <2% %
12 dB 78 dB any % <3% %
18 dB 84 dB any % any %
24 dB 90 dB
≥5%
%
≥5%
%
Secondary Frequency
Send PLCA
Transmit
Attenuation
(Attn)
Overall
Attenuation
(Attn + 66)
Recv PLCA
UnackSec
Error%
(expected)
Recv PLCA
UnackSec
Error%
(observed)
UUT
#Pkts
Received
(observed)
UUT
Sec
Error%
(expected)
UUT
Sec
Error%
(1011-#Rcvd)/10
0 dB 66 dB <1% % <1% %
6 dB 72 dB any % <3% %
12 dB 78 dB any % any %
18 dB 84 dB any % any %
24 dB 90 dB
≥5%
%
≥5%
%