Specifications

CVHE-SVN03D-EN 13
Remote
Starter
Figure 5. Typical equipment room layout with remote-mounted Wye-Delta starter
Notes:
1. Refer to the unit field connection diagram for approximate UCP knockout locations.
2. 115-volt conduit must enter the higher than 30 Vdc Class I portion of the unit control panel.
3. IPC circuit conduit must enter the Low Voltage Class II portion of the UCP. (1000 ft. max)
4. See starter submittal drawing for location of incoming wiring to the starter.
IPC Circuit
Conduit <30V
See Note 3
Motor Terminal Box
115V Control
Conduit
See Note 2
Line Side
Power Wiring
Remote-
mounted
Starter
Lead Power
Wiring