Specifications

12 CVHE-SVN03D-EN
Unit Mounted
Starter
Interconnecting
Wiring
Typical equipment room conduit
layouts with and without unit
mounted starters are shown in
Figure 4 and Figure 5, respectively.
Figure 4. Typical equipment room layout with unit-mounted, Wye-Delta
Note:
See Starter submittal drawing for location of incoming wiring to the starter.
Unit Control
Panel
Unit Mounted
Starter
Line Side Power
Conduits
Important: Keep in mind that the
interconnecting wiring between the
starter panel, compressor and UCP
control panel is factory-installed
with unit-mounted starters but must
be field-installed when a remote
mounted starter is used.