Specifications

USER’S HANDBOOK
1. INTRODUCTION
This document describes the STB-06-(x) test bench.
The test bench exists in two versions:
- a complete portable and autonomous test bench powered by internal batteries, model STB-06-A, P/N
02N65740,
- a laboratory test bench, model STB-06-LA,P/N 02N65739..
Operations and performances are identical between the two versions.
The differences are the housing metallic transport case and utilization of a portable computer for STB-06-
A.
STB-06-LA requires use of a computer that is supplied by the customer.
2. GENERAL
A. Purpose of the test bench
The STB-06-A
test bench can be powered from the shop power supply or using its own internal battery
in portable configuration. It can be used in workshop or onboard A/C.
The STB-06-LA is limited to work shop application
They are used to:
 Check the Radio Frequency (RF) performances of the different ELT’ transmitters
 ELT or Programming Box Cospas-Sarsat identification management.
They contain everything required for programming and testing the performance of ELT’ distress
beacon.
B. Software Improvement from the initial version
The new release version 1.2.8.0. Incorporates the following evolutions of the test bench software:

Upgrade to process the new Cospas-Sarsat “User Aviation Protocol” (management of “specific
ELR Number”,
 Addition of “ADT 406 AF/AP – H” ELT new model dedicated to helicopters application (PN:
01N65901),
 Improvement of the Compatibility for Windows 7 (or Vista),
 New software location on computer main hard disk under "…\Program Files\ELTA\STB-06-
V1.2.8.0" new directory (allows operation of several test bench variants on the same
computer).
Page 8
Mar
. 08/12