Specifications

USER’S HANDBOOK
5. MAINTENANCE
The test bench does not require any special maintenance operation, care must simply be taken to ensure
that the batteries are correctly charged (for STB-06-A only).
A. Calibration
The test bench must be checked (calibration verification) every two years in order to guarantee
measurement reliability
.
This task shall be performed by ELTA. A Calibration Certificate is issued by ELTA to release the test
bench to service.
B. Spare parts list
The following sp
are parts are available in order to guarantee measurement reliability.
- Case and foam filling : 05N61329
- Test Interface Device battery : 94P7660
- RS232 cable between the Test Interface Device and portable computer : 94N6493
- USB/RS232 adapter for portable computer : 28946
- RF coaxial cable (50 ) with TNC/BNC adapter : 94N6460
- Programming cable for A06xx/S06 : 93N6222
- Programming cable for Programming Box (A06V2) : 96N9028
- Extension programming cable for A06V2 : 96N9029
- Programming cable for ADT 406(x) : 02N65746
- ADT programming cable 5 meters serial link extension : 02N66199
- RS 232 serial link for computer connection (STB-06-LA) : 95N6072
- International external power supply plug converter : 25323
- Dual external power supply socket : 27126
- Test Interface Device External Power Supply adapter : 24931
- Test Interface Device : 00N62873
- Portable computer, with disk drives : 05P62443
- CodADT tool : 05N62132
- User’s handbook STB 06 A/LA : 02E65745
- Remote unit simulator (for Prog. Box A06V2) : 99N9002
Contact ELTA to obtain these spare parts.
Page 84
Mar
. 08/12