Specifications

USER’S HANDBOOK
Result of ELT Test (A06xx/S06)
Figure 34
The results display area is divided into three sections:
– one section displaying UHF measurement results (406.025 MHz for A06, A06V1, A06V2, S06
ELT', 406.028 MHz for ADT406 ELT')
– one section displaying VHF measurement results (121.5 MHz),
– one section displaying UHF measurement results (243 MHz).
The test is successful when the three frequencies section names (406.025 or 406.028-121.5-243
MHz) are printed in green.
For failures, the relevant section name 406-243-121.5 MHz and the faulted value case are
displayed in red.
Clicking on Test Of
f will open an auto save box requesting to enter the ELT serial number and a
remark for the follow up of the test report. If the P/N is available in the ELT transmitter it will be
used to create the test report file name. If not, the operator will select the correct one in the
presented rolling list. Test mode remains active and further RF test are possible.
Clicking either M
aintenance or Identification will open an auto save box and stop the RF tests.
Page 59
Mar
. 08/12