Specifications

USER’S HANDBOOK
The following screen (Ref. Fig. 12) is displayed offering the Operator three possibilities. It also
displays the sof
tware references (computer and Test Device) and the configuration files in the
lower right part of the screen.
Test Bench Main Menu
Figure 12
The three main functions are:
 Identification: deals with the COSPAS-SARSAT ELT identification (ELT encoding),
 Test: deals with the RF measurements on the three operational frequencies,
 Maintenance: deals with the ELT maintenance tasks.
The configuration files can be updated or exchanged alone without any test bench software re-
installation. Just copy the related file in the correct location of the hard disk.
Country code encloses the list of the current country code.
Specifications enclose the authorized limit for each RF parameter.
Code PNA06 encloses the list of the current P/N for the A06xx/S06 ELT equipment (with revision
index).
Code PNPB encloses the list of the current P/N for the Prog. Box equipment (with revision index).
Code PNADT406 encloses the list of the current P/N for the ADT 406 ELT equipment (with
revision index).
These configuration files are located under C:\Program Files\ELTA\STB-06-V1.2.8.0\Config for the
country code and C:\Program Files\ELTA\STB-06-V1.2.8.0\System for the other.
Note: Updated configuration files does not impact test bench software release. They can be
downloaded from ELTA website under secure access (login & password). Contact
ELTA as necessary.
Page 34
Mar
. 08/12