Specifications

USER’S HANDBOOK
(2)T
est procedure
(a)Test bench initialization and explanation of its functions and screens
If the title screen is not displayed click M
ode and then click Test Device.
Note: The Operator can perform tasks by using mouse or shortcut keys.
For example: press T key on the keyboard to select T
est (underlined letter).
By default STB-06-A test bench is using USB / RS232 adapter with com port # set to 4 : i.e;
Port Num = 4
The STB-06 test bench software is trying in sequence Port Num = 4, then propose to use
Port Num = 1.
If the USB/SERIAL is not set on one of these number, then it display a general error box for a
manual resolution.
If this error box related to serial link appears (Ref. Fig. 10), you need to modify the settings for the
appropriate COM port (Serial link with the Test Interface Device).
Serial Link Error
Figure 10
With a standard computer, look for the active COM port settings from Control Panel and System
screen of the computer.
After finding the appropriate COM port number you are using, modify the “Port Num #” from
program’s configuration file “Series.ini” located at:
C:/Program Files/ELTA/STB-06-V1.2.8.0 /System. We recommend using WORDPAD in order to
avoid any additional control characters in the file.
Page 32
Mar
. 08/12