Specifications

USER’S HANDBOOK
E. Functional test of ELT
(1)T
est set-up
– Disconnect the ELT antenna from ANT Connector (A06xx/S06) or EXT. ANT. or BACK UP ANT.
(ALL ADT 406 ELT MODELS, EXCEPT ADT 406 S) or ANTENNA (ADT 406 S),
– Open the test bench transport case (STB-06-A only).
– If the test bench is not used in autonomous mode, connect it to external power supply or to an
external DC power supply (12 Vdc):
. remove the external power supply adapter from the case. Connect the adapter to the
external power supply and the adapter DC output connector to the DC 12V IN connector on
the Test Interface Device,
. the indicator light on the Test Interface Device comes on red.
– Verify the connection of the serial link (with USB / RS232 adapter and RS232 cable for portable
computer) between the computer and the Test Interface Device input COMP.
Portable Computer (STB-06-A) :
Office computer (STB-06-LA) :
Computer
Test Interface
Device
USB / RS232
adapter
RS232 cable
P/N:94N6493
Test Interface
Device
Computer
RS232 cable
P/N:95N6072
–
Power up the computer by pressing the ON/OFF key on the keyboard. The computer screen will
come on after a few seconds.
– Click on the STB_06 icon if there is no automatic activation of the test bench software.
Page 31
Mar
. 08/12