Specifications

USER’S HANDBOOK
C. Putting into service
For STB-06-LA: follow the complete procedure except those related to the port
able computer. If
required USB/ RS232 adapter may be applicable (no physical serial link on the PC computer).
(1)Preliminary operation
Open the case and check that the following components are present and in good condition:
- Test Interface Device,
- Portable Computer, with floppy disk drive,
- External Power Supply Adapter,
- CodADT tool,
- CDROM Drive,
- Connection Cables,
- USB / RS232 adapter (for portable computer),
Make sure that:
- The computer is connected to the Test Interface Device (COMP connector) with the RS232 cable
P/N: 94N6493 and the USB / RS 232 adapter,
- The coaxial cable is connected to the Test Interface Device (RF connector),
- The portable computer is powered from its External Power Supply Adapter (if not it is in portable
configuration),
- The Test Interface Device is powered from its External Power Supply Adapter (if not it is in
portable configuration),
Note: Use the international Plug Adapter as necessary.
Page 23
Mar
. 08/12