Specifications

USER’S HANDBOOK
(5) Connection Cables
The connection cables are divided in four categories: the power supply cables, the programming
cables, the Serial link cable and the RF cables.
-
The two power supply cables are used to power the Test Interface Device and the portable
computer when the test bench is not working in autonomous mode.
- The four programming cables for connecting the Test Interface Device PROG connector to the
different ELT transmitters, CodADT tool or Programming Box:
 For the Programming Box of the ELT model A06V2, use the P/N 96N9028 cables,
 For the A06V2 ELT transmitter, use the P/N 96N9029 extension cables associated to the P/N
96N9028 cable. They are connected to the ELT TC connector and to the Test Interface Device
PROG connector,
 For the ADT406 ELT and the CodADT, use the P/N 02N65746 cable connected to the ELT
Remote Control connector,
 For the A06 or A06V1 or A06T or S06 ELT, use the P/N 93N6222 cable connected to the ELT
TC connector,
- USB / RS232 adapter + RS232 cable P/N 94N6493. This cable plus the USB / RS232 adapter
are used to connect the Test Interface Device (COMP connector) to the portable computer (USB
connector). For STB-06-LA use only RS232 connection cable P/N 95N6072.
- the coaxial cable P/N 94N6460 is used for connecting the ELT ANT or EXT. ANT. connector or
BACK UP ANT. to the Test Interface Device RF connector.
Note: A standard TNC/BNC adapter is supplied for ELT model A06xx/S06 RF connections.
Page 21
Mar
. 08/12