Specifications

USER’S HANDBOOK
CodADT
P/N: 05N62132
Portable Computer
(STB-06-A)
Or Customer Computer
(STB-06-LA
Connection to Serial
Link
2
1
3
Transfer of “Activation/Identification
module” from the ELT to the CodADT
tool.
 Remove module from ELT transmitter,
 Plug the module on the CodADT tool for encoding purposes,
 Restore the module on the ELT.
CodADT tool operation with an ADT406S
Figure 7
Note: this CodADT tool can also “technically” encode the module of the other ADT 406
models, but documentation report will not display the correct ref. Limit this operation
to emergency case.
WARNING: Verify that “Battery used time” item (see fig 52 as example) is duly set to “00 H 00
MIN”. If not you must perform a “RESET BATTERY” maintenance task per § E. (4) (b)
[Fig 44] on the CodADT tool (it is the same process as for one ADT 406 AF/AP ELT. It
will “Reset” the “Battery used time” item (see fig 52 as example)” inside the CodADT
tool.
Page 20
Mar
. 08/12