User Manual

LOCATION OF PARTS WITH ROUTINE MAINTENANCE

CHECKS AND LUBRICATION

SAFE CYCLING AND SAFETY TIPS

Before you ride your bicycle at any time make sure it is in a safe operating condition. Particularly check that your:-

• Bicycle’s nuts, bolts and parts are tight and not worn or damaged.

• Riding position is comfortable (refer to page 5).

• Brakes are operating effectively.

• Steering is free with no excessive play.

• Wheels run true and hub bearings are correctly adjusted.

• Wheels are properly secured and locked to frame/fork.

• Tyres are in good condition and inflated to correct pressure.

• Pedals are securely tightened to pedal cranks.

• Gears are correctly adjusted.

• All reflectors are in position.

After you have made any adjustments to your bicycle, check that all nuts and bolts are securely tightened and cables

are free from kinks and fixed securely to the bicycle frame.

Every six months (more frequently if high mileage or subject to heavy use) your bicycle should be professionally

checked to ensure that it is in correct and safe working order. A ‘Service Record’ is provided for your use.

Refer to table of Recommended torque values - page 6.

Half Yearly - Remove and clean, lubricate chain, derailleur gears and all cables. Check and replace as required.

Yearly - Remove, clean and regrease hub axles, bottom bracket set and headset.

NB - Wash cycle weekly with warm soapy water and polish dry with a soft cloth. Do not pressure wash.