User's Manual

VRT WATER TRANSPONDER INSTALLATION & PROGRAMMING
VRT Transponder—User Guide Page 10
AMCO Automated Systems, January 2003 Last Saved: 1/28/2003 10:00 AM
TBD
9. Leak Consumption
TBD
10. Meter Type
TBD
11. Next Daylight Saving Time Day Number
The transponder’s internal clock will automatically switch to daylight
saving time on the date represented by the value entered into this
field. The value must represent a future date. Please refer to table
[TABLE 01] for a list of valid entries. This value is programmed at
the factory for the next valid date after it is shipped, but must be
updated by the utility for subsequent periods. In the event of a
power interruption the value is retained.
12. Next Standard Time Number
The transponder’s internal clock will automatically switch to standard
time on the date represented by the value entered into this field. The
value must represent a future date. Please refer to table [TABLE 01]
for a list of valid entries. This value is programmed at the factory for
the next valid date after it is shipped, but must be updated by the
utility for subsequent periods. In the event of a power interruption
the value is retained.