User's Manual

CHAPTER 6 VRT REMOTE GAS-METER TRANSPONDER INSTALLATION
VRT Gas Transponder ― User Guide Page 31
AMCO Automated Systems • P/N 52870T010 Rev 1 May 2003
Meter-mounting Procedure
The illustrations below show how the meter-mount brackets should
be assembled (for right-hand or left-hand mounting) prior to
attaching them to the meter.
1. Attach bracket A to bottom of the transponder.
• Use the 2 Phillips-head screws, placed in diagonal
positions.
• Although transponder has only 2 holes on its base, the
bracket has 4 holes to accommodate left- or right-hand
mounting.
• Do not over-tighten the screws.
Attach
transponder
base here
Brackets assembled for LEFT-HAND mounting
Adjust distance between meter mounting
holes using slide screws and slot.
B
Attach
transponder
base here
Transponder
TOP
Brackets assembled for RIGHT-HAND mounting
A
A
Mount
transponder
to bracket
using the 2
Phillips-head
screws in
diagonal
positions.